Cisco 2600接入adsl的两种方式配置

不指定
2009-7-26 22:44 by:果面 PC应用 » 网络应用 本站原创 | |
  一.WIC-ADSL 卡接线路

  vpdn enable

  no vpdn logging

  !

  vpdn-group pppoe

  request-dialin

  protocol pppoe

  !

  inter f0/0

  ip add 192.168.0.1 255.255.255.0

  ip nat inside

  ip tcp adjust-mss 1450

  !

  inter ATM0

  no ip address

  no atm ilmi-keepalive

  bundle-enable

  dsl operating-mode auto

  hold-queue 224 in

  interface ATM0.1 POINT-TO-POINT

  pvc 8/35 此处的pvc值8/35要根据具体情况而定,咨询电信

  pppoe-client dial-pool-number 1

  !

  inter dialer1

  ip address negotiated

  ip nat outside

  encap ppp

  dialer pool 1

  ppp authen pap callin

  ppp pap sent xxxx pass xxxx 用户名密码

  !

  ip nat inside source list 1 interface dialer1 overload

  ip calssess

  ip route 0.0.0.0 0.0.0.0 dialer1

  no ip http server

  !

  access-list 1 permit 192.168.0.0 0.0.0.255

  二.或者利用另外一个以太网口 接到 ADSL MODEM再接线路

  hostname xxxx

  ip name-server x.x.x.x dns的地址

  vpdn enable

  vpdn-group pppoe

  request-dialin

  protocol pppoe

  inter f 0/0

  ip add 192.168.0.1 255.255.255.0

  ip nat inside

  inter f 0/1

  no ip address

  pppoe enable

  pppoe-client dial-pool-number 1

  inter dialer 1

  mut 1492

  ip address negotiated

  ip nat outside

  encap ppp

  no ip mroute-cache

  dialer pool 1

  dialer-group 1

  no cdp enable

  ppp authen pap callin

  ppp pap sent xxx pass xxx 用户名密码

  ip nat inside source list 1 inter dialer 1 overload

  ip classless

  ip route 0.0.0.0 0.0.0.0 dialer1 permanent

  no ip http server

  ip pim bidir-enable

  access-list 1 permit any

  dialer-list 1 protocol ip permit
评论(0) 引用(0) 阅读(1719)